Topic: RCWCreations diorama's

[RCWCreations]

Second base coat added, once this is dry I can start layering this.

https://richardscreativeworkshop.co.uk/blade-runner-2049-final-scene/#24_01

[RCWCreations]

While the 2nd coat is drying, time to start my next commission piece.

With this diorama build I will be constructing it out of foam insulation board  using widths 5 mm and 10 mm.  For the overall base I am using 10 mm foam board 25" width by 16" depth.   Two walkways on either side running the length of the diorama, one side with the width of 4" and the opposite 3" width.  A central wall at one end with a semi circle cut out to act as a grate fitted between the two walkways with a couple of little walls either side.

https://richardscreativeworkshop.co.uk/sewer/

[Tamer]

Wow, you have two going now. Looks like a great start and continued great work on the BR one. Off to share.

[RCWCreations]

Thanks Tamer.

Been busy with the sewer this weekend.

With the basic form there I started to build upon the structure, building two walls and a second layer for both walkways.  With these parts cut it is time to mark up the brick work.

https://richardscreativeworkshop.co.uk/sewer/#27_01

[RCWCreations]

 I cut a crescent a half an inch width to go over the central column, I then marked on the brick work, each brick is 2? x 1?.  Once completed I took an etching tool a scored out each brick and crack.  After completing the walls and central column I repeated the process on the two walkways.

https://richardscreativeworkshop.co.uk/sewer/#27_01

[RCWCreations]

A few more pictures of the walls and walkways.

[RCWCreations]

 I cut a crescent a half an inch width to go over the central column, I then marked on the brick work, each brick is 2" x 1".  Once completed I took an etching tool a scored out each brick and crack.  After completing the walls and central column I repeated the process on the two walkways.

https://richardscreativeworkshop.co.uk/sewer/#27_01

[Tamer]

Wow, you got a ton of work done quickly on this one. It looks great.

Off to share.

[Clonehead]

Panther, that is sweet looking! Man, the fun part is coming now.

[hemble]

I'm really loving these builds bud keep up the awesome work.

Ron

[RCWCreations]

Thanks guys, it means a lot.

Last night I went back to Blade Runner steps.  With the base coat dried, I could start weathering this piece using my airbrush.  Using a fine spray I went over all the edges with a dark brown, with that dry I I gently sprayed over the entire model.

https://richardscreativeworkshop.co.uk/blade-runner-2049-final-scene/#29_01

[Tamer]

Yepper, looks like I remember it from the film. Off to share the latest.

[RCWCreations]

Using GW's Longbearbeard Grey, I dry brushed the all stone work to pick out the detail

https://richardscreativeworkshop.co.uk/blade-runner-2049-final-scene/#30_01

[RCWCreations]

At the request of my client, I painted the hand rails white.  When they are dried I will weather down and dry brush them using GW's Necron compound.

https://richardscreativeworkshop.co.uk/blade-runner-2049-final-scene/#30_01

[Tamer]

Looks like its almost done to me.

Off to share.