Topic: RCWCreations diorama's

[RCWCreations]

I've made a second smaller but higher console to be placed the other side to Teletraan. The hot glue melted some of the foam which I have filled using liquid Green Stuff, when it's dry I'll sand it down and start adding detail to them both.

I'm just wondering which way round they should go?

https://richardscreativeworkshop.co.uk/teletraan-1/#21-11

[Tamer]

Very nice. Looks good where you have it.

Off to the front pages.

[RCWCreations]

I've completed the engraving on the foam consoles, made a couple of wall mounted monitors and a small Soundwave who can sit on top of the consoles and Teletraan.

The next step is to add some plastic card buttons before I give this all a black undercoat.

https://richardscreativeworkshop.co.uk/teletraan-1/#22-11

[Tamer]

Looks good! Right outta my past.

I might have to go back and rewatch some of this.

Off to the front pages.

[RCWCreations]

Busy day yesterday and here is why!

1.  Final pictures of G.I.JOE modular diorama are now live on my website.

https://richardscreativeworkshop.co.uk/g-i-joe-modular-stands/#final

[RCWCreations]

2. Final pictures of G.I.JOE Armoury commission are now live on my website.

https://richardscreativeworkshop.co.uk/armoury/#final

[RCWCreations]

Final four pictures of this this piece.

https://richardscreativeworkshop.co.uk/g-i-joe-modular-stands/#final

[RCWCreations]

Painting is underway in the Ark, I've mixed up a bright orange with I am applying two coats because the first coat is too dark. Teletraan and the consoles are also having their second coat added, the first coat I used a new air brush paint which would be fine to use as a second coat but not a first. The paint was too thin for the foam.

When this dries, a second coat will be applied to the back wall and floor and then again to the consoles and Teletraan.

https://richardscreativeworkshop.co.uk/teletraan-1/#painting

[Tamer]

Both look great.

Man, that is definitely the color I remember for the Teletraan I.

Off to the front pages.

[RCWCreations]

It's taken a couple of days to finally get this looking as I wanted it. Word to the wise never undercoat with black when you want to base coat with orange!  The orange paint was soaking into the black undercoat where it looked like a black console with an orange shade.

This is how it looked yesterday!

https://richardscreativeworkshop.co.uk/teletraan-1/#24-11

[RCWCreations]

A few more coats later it is looking more like it did in the cartoon.

I can now get on with shading and painting in the detail!

The little Soundwave looks great on this!

https://richardscreativeworkshop.co.uk/teletraan-1/#24-11

[RCWCreations]

I've doing a little detail work, applying shading, painting the monitors, buttons, lights and the insignia. Starting to look more like it did in the cartoon.

https://richardscreativeworkshop.co.uk/teletraan-1/#25-11

[RCWCreations]

Almost there with this Transformers diorama, I needed to test it out!

https://richardscreativeworkshop.co.uk/teletraan-1/#25-11

[Tamer]

Now that turned out nice. Man, great job.

Off to share on the front pages.

[RCWCreations]

I have completed the painting of Teletraan and the two consoles, applied a few decals on the monitors and I’m currently looking for the perfect image to place on Teletraan centre screen. Do I go G1 cartoon, from a comic, add a grid or a huge Autobot insignia?

https://richardscreativeworkshop.co.uk/teletraan-1/#26-11