While the paint is drying with one model, I've started something new.
I was looking over some cells from the X-Men Animated cartoon of the 90s and came across one of an alleyway back entrance to a building and thought this would be a great little piece to build.
This piece will be a 2 piece display, made up of a back wall and floor. The back wall will be a brick wall with a static closed door in the middle.
I cut out the back wall from a piece of 10 mm foam board and before I stuck it onto a piece of 6 mm board, I cut out the door frame. I marked out the brickwork and then added extra pieces of 10 mm onto the front, I also cut a couple of steps for the door out of 6 mm foam. I then cut out a strip of 30 mm foam board of 1? thickness to go across the top. My next step is to score brickwork into it.
https://richardscreativeworkshop.co.uk/building-entrance-display/