Hi All,
Mr Gutsy and T-60 Power Armour, 1:12 scale.
Recipe.
T-65/Mr Gutsy/Rifle - these are all 3D resin printed and I got them from Budget 3D Works over on Patreon and the head is from TECO Toys and was originally 1:35 scale and I resized it. The thruster on Mr Gutsy was added as I didn't do the supports correctly and the thruster section didn't print correctly, I painted and weathered both figures with Vallejo Paints and Pastel chalks.
Base - is blue foam with a balsa wood trim and the groundwork is built up with thin pieces of blue foam and then covered using a mix of spakfilla/ground up mulch/sand/kitty litter and applied.
Once the groundwork was dry, I gave is a few washes of dark to medium browns and then dry brushed with lighter browns, the trees are from the local bushland.
I wanted to have the vegetation a little green but withering so I used weeds from the garden and then dipped them into methylated spirits and put them out in the sun to dry for an hour and then soaked them in AK's Natural Leaves & Plants protection for 24hrs so they wouldn't wither anymore.
Ron